Description
7inch DSI Capacitive Touch Display with 5MP Camera for Raspberry Pi (800×480)
This 7″ DSI display for the Raspberry Pi comes with a front built-in 5MP OV5647 camera module which can be used with the same commands as the official Raspberry Pi camera module.
The display is a 7″ panel offering up to 5-point capacitive touch (OS dependant) and 800×480 resolution. The screen connects to your Raspberry Pi via the same DSI ribbon cable and 5V/GND jumper wire method as the official Raspberry Pi display. This leaves the majority of your GPIO pins free for your project.
The display backlight can be adjusted via software/touch and the generous outer bezel also makes this a great option for integrating into your project enclosure. The included camera module connects to your CSI port via the included ribbon cable and uses a 5MP OV5647 sensor which can shoot images up to 2592×1944 and videos up to 1920x1080P @30FPS (full specs below).
The display comes with fixings, ribbon cables and jumper wires. The online Wiki provides instructions on how to set up and configure the display.
Features
- 7″ DSI display for Raspberry Pi
- Supports Raspberry Pi OS driver-free
- Compatible with Raspberry Pi boards with a DSI connector – Raspberry Pi 4, 3B+, 3A+, 3
- 800×480 resolution
- 5-point capacitive touch
- 5MP OV5647 Camera
- CSI interface, supports?1920x1080p@30,?1280x720p@60, 640??480p@60, 640??480p@90
- I2C touch port
- Toughened glass panel
- Supports backlight adjustment via software
- DSI interface, refresh rate up to 60Hz
- Low power consumption
Connection Example
Specifications – Display
- 7″ Display
- 800×480 Resolution
- DSI interface
- 5-point capacitive touch
- Toughened glass
- Dimensions: 192.96mm x 110.76mm
Specifications – Camera
- Sensor: OV5647
- Pixels: 5MP
- Focal length: 3.89mm
- Distortion: < 1.5%
- CMOS size: 1/4″
- Aperture: F2.4
- Diagonal FoV: 72.9??
- Depth of Field: ~20cm
- Image: 2592 ?? 1944 still image resolution
- Video: 1920??1080p @30, 1280??720p @60, 640??480p @60, 640??480p @90
Package Contents
- 1x 7″ DSI LCD
- 2x FPC 15PIN 1.0 pitch 50mm (opposite sides)
- 1x FPC 15PIN 1.0 pitch 120mm (opposite sides)
- 1x 2-pin GPIO wire (10cm)
- 1x Screws pack
Raspberry Pi not included
Resources
- Product Wiki
Reviews
There are no reviews yet.